Product Description

150mm Vitreous Enamel Stove Connector Pipe

Model: 67-150-004

Connect your stove to a compatible flue system with the VIT-Smooth 150mm Vitreous Enamel Stove Connector Pipe. This purpose-made component provides a neat connection between a suitable appliance outlet and the next part of the flue route.

The connector has a nominal internal diameter of 150mm (6 inches). Therefore, it suits appliances and flue systems that require a 150mm connection.

In addition, its smooth matt-black enamel finish complements most traditional and modern UK stoves. The internal and external enamel coating also helps protect the steel from heat and corrosive combustion gases.

At a Glance

• 150mm (6-inch) stove connector pipe
• Connects a compatible appliance to the flue route
• Made from 1.2mm zero-carbon steel
• Internal and external vitreous enamel coating
• Approximately 1.4mm total finished thickness
• Smooth matt-black finish
• Friction-fit connection system
• Suitable for compatible gas, oil and solid-fuel appliances
• Temperature classification: T600
• Declared clearance to combustible materials: 450mm
• Model: 67-150-004
• EAN: 5060795860123

Key Features and Benefits

• Direct stove connection: Helps connect a compatible stove outlet to the flue route.
• 150mm diameter: Matches compatible 6-inch appliances and VIT-Smooth components.
• Strong steel construction: Uses 1.2mm zero-carbon steel for strength and durability.
• Internal enamel coating: Helps resist heat and combustion deposits.
• External enamel coating: Provides a neat and easy-to-clean surface.
• Smooth matt-black finish: Complements most contemporary and traditional stoves.
• Friction-fit connection: Allows simple assembly with compatible components.
• T600 classification: Suits compatible high-temperature stove installations.
• Versatile fuel compatibility: Works with suitable gas, oil and solid-fuel appliances.

What Is a Stove Connector Pipe?

A stove connector pipe joins a compatible appliance outlet to the next part of the connecting flue. It can help create the first secure connection between the stove and a straight pipe, bend, adaptor or other suitable component.

This connector forms part of a single-wall connecting flue system. Consequently, it should only cover the visible route between the appliance and a suitable chimney, flexible liner or insulated twin-wall flue system.

However, stove outlets can vary in size and design. Some appliances use an internal outlet, while others use an external spigot. Therefore, check the stove manufacturer’s instructions and measure the outlet carefully before ordering.

Why Choose VIT-Smooth?

VIT-Smooth offers a high-quality alternative to basic welded black stove pipe. The manufacturing process creates tidy welds and a smooth, consistent finish. As a result, the completed installation looks clean and professional.

The manufacturer forms this component from 1.2mm zero-carbon steel. It then adds approximately 0.2mm of powder vitreous enamel. Together, the steel and coating create a total finished thickness of approximately 1.4mm.

Furthermore, the enamel covers both the inside and outside of the component. The internal layer helps resist heat and corrosive combustion products. Meanwhile, the external layer creates a deep matt-black finish that matches most UK stoves.

VIT-Smooth 150mm Stove Connector Specification

• Product type: stove connector pipe
• Model/SKU: 67-150-004
• EAN: 5060795860123
• Nominal internal diameter: 150mm (6 inches)
• Material: zero-carbon steel
• Steel thickness: 1.2mm
• Coating: powder vitreous enamel
• Approximate enamel thickness: 0.2mm
• Approximate total finished thickness: 1.4mm
• Coating position: internal and external
• Colour: black
• Finish: smooth matt black
• Connection type: friction fit
• Fuel compatibility: gas, oil and solid fuel
• Temperature classification: T600
• Classification: EN 1856-2 T600 N1 Vm L80120 G450
• Declared minimum distance to combustible materials: 450mm
• Manufacturer warranty: 12 years, subject to its terms

Suitable Appliances and Flue Systems

You can use this connector with compatible gas, oil and solid-fuel appliances. These may include wood-burning stoves, multifuel stoves and other domestic heating appliances.

However, always check the appliance instructions first. The stove manufacturer will state the required flue diameter, outlet arrangement and temperature classification.

The connector can form part of a route leading to:

• A suitable masonry chimney
• An approved flexible chimney liner
• A compatible flue-liner adaptor
• An insulated twin-wall flue system
• Matching 150mm VIT-Smooth pipes and fittings

Check the Stove Outlet Before Ordering

First, confirm that the appliance requires a 150mm flue. Next, check the exact internal and external measurements of its outlet spigot. Finally, confirm which way the connector needs to fit.

A nominal 150mm description does not guarantee compatibility with every stove outlet. Manufacturing tolerances, spigot shapes and connection methods can vary between appliances.

Therefore, do not force the connector onto an unsuitable outlet. If you remain unsure, speak to the SNH Tradecentre team before ordering.

Application

This 150mm vitreous enamel connector is suitable for use as part of a visible single-wall connecting flue. It helps link a compatible heating appliance to an appropriate chimney or insulated flue system.

The product carries a T600 temperature classification. Therefore, it has a nominal maximum continuous flue-gas temperature classification of 600°C.

Never use single-wall vitreous enamel stove pipe to pass through walls, ceilings, floors, roofs, cupboards or concealed spaces. Instead, use a suitably tested and insulated chimney system wherever the flue passes through the building structure.

Correct Installation Direction

Install matching VIT-Smooth pipework with the male or smaller-diameter end pointing downwards towards the appliance. The female end should face upwards towards the chimney.

This direction keeps condensates and combustion deposits inside the flue system. As a result, they can travel back towards the appliance instead of leaking onto the outside of a joint.

However, the connection at the stove must also follow the appliance manufacturer’s instructions. Some stove outlets may require a particular adaptor, sealing rope or approved fire cement.

Jointing and Sealing

VIT-Smooth components use friction-fit joints. Therefore, connections between matching VIT-Smooth parts do not normally require fire clay.

However, the joint directly at the appliance may need a different sealing method. For example, the stove manufacturer may specify fire rope, fire cement or an approved high-temperature sealant.

Always follow the instructions supplied with the stove and complete flue system. In addition, never use ordinary household silicone because it may not withstand flue temperatures.

Can the Connector Be Cut?

Only cut the component if the manufacturer and installation instructions allow it. Cutting may chip the vitreous enamel, expose the steel and remove a formed connection end.

Therefore, choose a compatible standard component wherever possible. This approach keeps the factory enamel coating and connection profile intact.

If alteration proves unavoidable, protect every exposed steel edge with suitable high-temperature paint. Furthermore, make sure the modified component still forms a safe and secure connection.

Clearance from Combustible Materials

This product has a declared minimum distance of 450mm from combustible materials. Combustible materials may include timber, furniture, curtains and heat-sensitive building products.

In addition, do not automatically treat plasterboard as non-combustible. It may cover timber studs or form part of a combustible wall structure.

The appliance or another part of the installation may require a greater clearance. If the stated clearances differ, always follow the greatest distance.

Installation Safety

Before installation, check the connector diameter, stove outlet and complete flue route. Also, confirm that every component has a compatible temperature and fuel classification.

The completed installation must follow the appliance instructions, the flue-system instructions, current Building Regulations and all relevant standards.

Therefore, we recommend using a suitably competent installer. For solid-fuel appliances, this may include a HETAS-registered installer.

Inspection and Maintenance

Check the connector and nearby joints regularly. Look for movement, damaged enamel, staining, corrosion or signs of leakage.

In addition, make sure the complete flue system provides suitable access for inspection and sweeping. An access-door pipe, inspection elbow or tee may help where the layout limits cleaning access.

Only clean the external enamel after it has cooled completely. Use a soft, dry or slightly damp cloth. Avoid abrasive pads and harsh chemicals because they may damage the matt-black finish.

Finally, replace the connector if it becomes badly damaged, distorted, corroded or insecure.

Product Guides and Matching Components

• Download the VIT-Smooth brochure
• Read our guide to choosing black stove pipe
• View matching 150mm vitreous enamel flue components

Why Buy from SNH Tradecentre?

• Specialist stove, chimney and flue-system supplier
• Extensive range of matching 150mm VIT-Smooth components
• Practical advice from an experienced team
• Nationwide UK delivery options
• Secure online ordering
• Trade counter in Birchington, Kent
• Support before and after your purchase

Need help checking whether this connector will fit your stove? Call the SNH Tradecentre team on 01843 842727 before ordering.

You can also read SNH Tradecentre customer reviews on Google.

Frequently Asked Questions

What does this stove connector do?

It helps connect a compatible stove outlet to the next part of a 150mm single-wall flue route.

What diameter is the connector?

It has a nominal internal diameter of 150mm, which equals approximately 6 inches.

Will it fit every stove with a 150mm outlet?

Not necessarily. Stove spigots can have different shapes, tolerances and connection methods. Therefore, check the appliance instructions and measure the outlet before ordering.

Can I use it with a wood-burning stove?

Yes, it suits compatible solid-fuel appliances, including many wood-burning and multifuel stoves. However, the appliance must require a 150mm flue connection.

Can the connector pass through a wall or ceiling?

No. This is a single-wall connecting component. It must not pass through walls, ceilings, floors, roofs or concealed spaces. Use a suitable insulated chimney system for building penetrations.

How far must it remain from combustible materials?

The declared minimum clearance is 450mm. However, follow a greater distance if the appliance or another flue component requires one.

Does it need fire clay?

Matching VIT-Smooth components use friction-fit joints, so they do not normally need fire clay. However, the connection at the stove may require fire rope, fire cement or another approved sealing method.

Which way up should the flue pipe go?

The male or smaller-diameter end of the connecting pipe should normally point downwards towards the appliance. Always follow the stove and flue-system instructions.

What does T600 mean?

T600 means the component has a nominal maximum continuous flue-gas temperature classification of 600°C.

Can I cut the connector?

Only cut it if the manufacturer permits the alteration. Cutting can damage the enamel and expose the steel. Therefore, protect every exposed edge with suitable high-temperature paint.

What warranty does it include?

The manufacturer lists a 12-year warranty. However, its installation, use and maintenance conditions will apply.