Product Description

Vitcas Heat Resistant Board Adhesive 310ml – 1350°C

Model: VITCAS-BA-310ML

Fix and join compatible high-temperature boards with Vitcas Heat Resistant Board Adhesive. This ready-mixed adhesive withstands temperatures up to 1350°C and comes in a convenient 310ml cartridge for clean, controlled application.

Use it to join insulation boards, vermiculite boards, construction boards and high-temperature plasterboards. In addition, it can bond suitable boards to flat brickwork or blockwork where the gap does not exceed 5mm.

Key Features

• High-temperature board adhesive
• Withstands temperatures up to 1350°C
• Supplied in a 310ml cartridge
• Ready mixed and ready to use
• Grey finish
• Suitable for jointing compatible heat-resistant boards
• Bonds suitable boards to flat brickwork and blockwork
• Suitable for gaps up to 5mm
• Controlled application with a standard cartridge gun
• Designed for indoor use
• Product model: VITCAS-BA-310ML

Vitcas Board Adhesive Specification

• View the Vitcas product information
• Brand: Vitcas
• Product type: heat-resistant board adhesive
• Pack size: 310ml
• Colour: grey
• Consistency: ready-mixed adhesive
• Maximum temperature resistance: 1350°C
• Maximum recommended gap: 5mm
• Application method: standard cartridge gun
• Indoor use: yes
• Ready to use: yes
• Model: VITCAS-BA-310ML

Compatible Board Types

Vitcas Heat Resistant Board Adhesive suits the jointing and fixing of compatible high-temperature materials, including:

• Vermiculite boards
• Heat-resistant insulation boards
• Fireplace construction boards
• High-temperature plasterboards
• Other compatible fire-resistant boards

Always check the board manufacturer’s instructions before applying the adhesive. The board, adhesive and supporting surface must suit the expected operating temperature.

Suitable Applications

Use this adhesive for suitable indoor applications such as:

• Jointing between heat-resistant boards
• Fixing boards to flat brickwork
• Fixing boards to flat blockwork
• Fireplace construction and refurbishment
• Building suitable stove surrounds
• Installing compatible heat-resistant lining boards
• Joining boards around suitable heating appliances

Maximum Gap and Surface Requirements

The adhesive can bond compatible boards to flat brickwork or blockwork where the gap does not exceed 5mm. The background should provide a firm and even supporting surface.

Do not use this cartridge adhesive to fill large gaps or level uneven walls. Instead, choose a suitable thicker-bed product, such as Vitcas HB60, when the installation requires greater gap filling.

How to Apply Vitcas Board Adhesive

1. First, make sure the application area and surrounding surfaces are completely cold.
2. Check that the boards fit correctly before applying the adhesive.
3. Remove dust, grease, loose material and other contamination from both surfaces.
4. Make sure the boards and background surface are clean, dry and secure.
5. Cut the top from the cartridge and attach the nozzle.
6. Trim the nozzle to produce the required bead size.
7. Fit the cartridge into a standard sealant gun.
8. Apply an even bead to the board joints or prepared background.
9. Position the board and press it firmly into place.
10. Check the board alignment before the adhesive begins to set.
11. Remove any excess adhesive promptly.
12. Finally, allow the adhesive to dry and cure before exposing the installation to heat.

Before Applying Heat

Allow the adhesive to dry and cure fully before operating the stove, fireplace or heating appliance. Drying time may vary according to the temperature, humidity, joint thickness and porosity of the surrounding materials.

Always follow the application and curing instructions shown on the cartridge. In addition, follow the installation guidance supplied with the boards and heating appliance.

Important Installation Information

• Only apply the adhesive to cold surfaces
• Check that every board and surface is compatible before use
• Clean and prepare both surfaces before applying the adhesive
• Use only on flat surfaces where the gap does not exceed 5mm
• Use a suitable thicker-bed adhesive for larger gaps
• Support boards where required by the installation instructions
• Allow the adhesive to cure before applying heat
• Do not exceed the stated maximum temperature of 1350°C
• Follow all instructions and safety warnings on the packaging

What Is Included?

• 1 x 310ml cartridge of Vitcas Heat Resistant Board Adhesive
• Colour: grey
• Model: VITCAS-BA-310ML