UK Cylinders FlowCyl Buffer Direct 250L
The UK Cylinders FlowCyl Direct 250L Stainless Steel Buffer Tank adds water volume to compatible heat pump and heating systems. It includes a built-in 3kW immersion heater, seven 1-inch connections and three control ports. Model FCBVS0250.
£545.00 £654.00 (inc vat)
Product Description
UK Cylinders FlowCyl Direct 250L Stainless Steel Buffer Tank
Model: FCBVS0250
PLEASE NOTE: We can only deliver this product to Mainland England addresses.
The UK Cylinders FlowCyl Direct 250L Stainless Steel Buffer Tank adds water volume to compatible heating and heat pump systems. As a result, it can support steady water flow, improve system stability and help reduce frequent heat pump cycling.
This direct model includes a built-in 3kW immersion heater. Therefore, it can provide an additional electric heat source when used within a correctly designed heating system.
UK Cylinders manufactures the FlowCyl range in the UK using durable stainless steel. In addition, the tank includes seven 1-inch female threaded connections and three control-stat or thermistor ports. These connection options give installers greater flexibility when planning the pipework and control system.
Important: Not every heat pump or heating system needs a buffer tank. A qualified system designer or installer must calculate the correct capacity and confirm compatibility before ordering.
FlowCyl Direct 250L Buffer Tank Features
- Download the FlowCyl buffer tank installation instructions
- Download the FlowCyl buffer tank product information
- View the UK Cylinders FlowCyl Buffer range
- Register the UK Cylinders warranty
- 250-litre stainless steel buffer tank
- Designed for compatible heating and heat pump systems
- Built-in 3kW immersion heater
- Helps increase system water volume
- Can help reduce frequent heat pump cycling
- Supports steady system flow and operation
- Seven 1-inch female threaded connections
- Three control-stat or thermistor ports
- Allows independent temperature monitoring and control
- Standalone construction
- High-quality silver outer casing
- Outer casing is 100% recyclable
- Manufactured in the UK
- 25-year warranty, subject to the manufacturer’s terms
- Model: FCBVS0250
Key Features and Benefits
- Supports heat pump operation: Extra system volume can help a compatible heat pump complete longer and steadier operating cycles.
- Helps reduce short cycling: Correct buffer sizing may reduce frequent starting and stopping of the heat pump.
- Built-in immersion heater: The fitted 3kW immersion provides an additional electric heat source for compatible systems.
- Flexible pipe connections: Seven 1-inch female connections support a range of heating-system layouts.
- Multiple control ports: Three control-stat or thermistor ports help installers plan temperature monitoring and control.
- Stainless steel vessel: Strong construction provides dependable service in a correctly designed system.
- Made in the UK: UK Cylinders manufactures the FlowCyl range at its UK production facility.
Technical Specification
- Manufacturer: UK Cylinders
- Range: FlowCyl
- Model: FCBVS0250
- Product Type: Direct heating-system buffer tank
- Nominal Capacity: 250 litres
- Vessel Material: Stainless steel
- Installation Type: Standalone
- Immersion Heater: Built-in 3kW immersion
- Connections: 7 x 1-inch female threaded connections
- Control Ports: 3 x control-stat or thermistor ports
- Height: 1701mm
- Diameter: 545mm
- Empty Weight: 40kg
- Full Weight: Approximately 290kg
- Outer Casing: Silver, lightweight and 100% recyclable
- Warranty: 25 years, subject to the manufacturer’s terms
FlowCyl Direct 250L Buffer Tank Dimensions
- Height: 1701mm
- Diameter: 545mm
- Empty Weight: 40kg
- Approximate Full Weight: 290kg
Before ordering, check the available installation space and allow enough room for pipework, electrical connections and future servicing. The supporting floor must also suit the full operating weight of the tank.
How Does a Buffer Tank Work?
A buffer tank adds water volume to a heating circuit. It stores primary heating water and helps maintain steady flow through compatible heating equipment.
As a result, a heat pump may run for longer periods instead of frequently switching on and off. This can support stable operation when the heating zones require less energy than the heat pump’s minimum output.
However, every system has different requirements. Therefore, a qualified heating engineer must calculate the required buffer volume and design the pipework and controls correctly.
What Does “Direct” Mean?
This FlowCyl model includes a built-in 3kW electric immersion heater. The immersion can add heat directly to the primary system water when the heating design calls for it.
This product is a heating-system buffer tank. It is not a direct domestic hot water cylinder and should not store water for baths, showers or taps.
Suitable Applications
- Compatible air-source heat pump systems
- Compatible ground-source heat pump systems
- Low-temperature heating systems
- Zoned heating installations
- Systems that need additional primary water volume
- Systems requiring an additional electric heat source
- Heating installations where stable flow is important
What Is Included?
- 1 x UK Cylinders FlowCyl Direct 250L stainless steel buffer tank
- 1 x built-in 3kW immersion heater
- Model: FCBVS0250
Extra valves, controls, sensors, electrical components, fittings and pipework may be required. Therefore, your installer should check the complete system design before installation.
Installation Information
A suitably qualified heating engineer should design and install the buffer tank. In addition, a qualified electrician must complete the electrical connection for the immersion heater where required.
The installers must follow the latest UK Cylinders instructions and the requirements of the connected heating appliance. They should also confirm the buffer capacity, system pressure, pipe layout, electrical supply and control arrangement.
Why Choose a UK Cylinders FlowCyl Buffer Tank?
The FlowCyl combines stainless steel construction with flexible pipe and control connections. Therefore, it provides a practical way to add water volume to a compatible heating system.
This direct model also includes a 3kW immersion heater. Meanwhile, three control ports support temperature monitoring and system control. The 25-year warranty provides further reassurance when the tank is installed and maintained in line with the manufacturer’s conditions.
Why Buy from SNH Tradecentre?
- Competitive prices on UK Cylinders products
- Helpful product and technical advice
- Genuine products from established manufacturers
- Delivery available to eligible Mainland England addresses
- Trade and public customers welcome
- Collection available from our Birchington, Kent trade counter
- Independent UK plumbing and heating merchant
UK Cylinders may update product specifications, package contents and warranty terms without notice. Check the latest technical information and confirm system suitability with a qualified heating engineer before ordering.
Additional Information
| Manufacturer | UK Cylinders |
|---|---|
| Brand | |
| MPN | FCBVS0250 |
| SKU | FCBVS0250 |
| Unit Quantity | 1 |
| Warranty | 25 Year |
| Range | Buffer |
| condition | new |
| Woocategory1 | Heating & Cooling |
| Woocategory3 | |
| Woocategory2 | Hot Water Cylinders |
| Country/Region of Manufacture | United Kingdom |
| Energy Efficiency Rating | C |
| Style | Buffer Cylinder |
| Width | 545 |
| Height | |
| Depth | 545 |
| WRAS Approved | Yes |
| ccp_Type | Buffer |
| Material | Stainless Steel |
| Modified Item | No |
| Custom Bundle | No |
| Mount Type | Floor Standing |
| Litres | 201 – 250 |
UK Cylinders are delivered Direct.
Once its on its way, UK Cylinders will send tracking details to you by email.
Local Pick Up £45.00
Delivery £55.00
England & Wales Only.
Unfortunately UK Cylinders do not deliver to Ireland, Scotland or the Isle Of Wight.








