UK Cylinders FlowCyl Slim Buffer Direct 120L

£476.66 £571.99 (inc vat)

In stock

Product Description

UK Cylinders FlowCyl Slim Direct 120L Stainless Steel Buffer Tank

Model: FCNBV0120

PLEASE NOTE: We can only deliver this product to Mainland England addresses.

The UK Cylinders FlowCyl Slim Direct 120L Stainless Steel Buffer Tank adds water volume to compatible heating and heat pump systems. Its narrow 475mm diameter makes it a practical choice for smaller plant rooms, utility areas and installation cupboards.

The added system volume can help maintain steady water flow and reduce frequent heat pump cycling. Therefore, a correctly sized buffer may help the heat pump complete longer and more stable operating cycles.

This direct model includes a built-in 3kW immersion heater. As a result, it can provide an additional electric heat source when the system design and controls call for it.

UK Cylinders manufactures the tank from durable stainless steel. In addition, it includes seven 1-inch female threaded connections and three control-stat or thermistor ports. These connections give installers flexibility when planning the pipework and temperature controls.

Important: This is a primary heating-system buffer tank. It must not store or supply domestic drinking water for showers, baths or taps.

Not every heat pump system needs a buffer tank. Therefore, a qualified heating engineer must calculate the required capacity and confirm compatibility before ordering.

Installation Guides and Product Information

FlowCyl Slim Direct 120L Buffer Tank Features

  • 120-litre slimline heating-system buffer tank
  • Designed for compatible heating and heat pump systems
  • Narrow 475mm diameter
  • Built-in 3kW immersion heater
  • Helps increase primary heating-system water volume
  • Can help reduce frequent heat pump cycling
  • Supports steady heating-system flow
  • Seven 1-inch female threaded connections
  • Three control-stat or thermistor ports
  • Allows independent temperature monitoring and control
  • Stainless steel vessel
  • Standalone floor-mounted construction
  • High-quality silver outer casing
  • Outer casing is 100% recyclable
  • ErP energy efficiency class C
  • Manufactured in the UK
  • 25-year vessel warranty, subject to the manufacturer’s terms
  • Model number FCNBV0120

Key Features and Benefits

  • Slimline Construction: The 475mm diameter helps the tank fit through narrow doorways and into smaller installation spaces.
  • Supports Heat Pump Operation: Added system volume can help a compatible heat pump run for longer and steadier periods.
  • Helps Reduce Short Cycling: Correct buffer sizing may reduce frequent heat pump starts and stops.
  • Built-In Immersion Heater: The fitted 3kW immersion provides an additional electric heat source for compatible systems.
  • Flexible Connections: Seven 1-inch female connections support a range of system layouts.
  • Control Options: Three control-stat or thermistor ports support temperature monitoring and system control.
  • Stainless Steel Vessel: Strong construction provides dependable service within a correctly designed system.
  • Made in the UK: UK Cylinders manufactures the FlowCyl range at its UK production facility.

Technical Specification

  • Manufacturer: UK Cylinders
  • Range: FlowCyl Slim
  • Model: FCNBV0120
  • Product Type: Direct heating-system buffer tank
  • Nominal Capacity: 120 litres
  • Vessel Material: Stainless steel
  • Installation Type: Standalone, floor mounted
  • Immersion Heater: Built-in 3kW immersion
  • Connections: 7 x 1-inch female threaded connections
  • Control Ports: 3 x control-stat or thermistor ports
  • Energy Efficiency Class: C
  • Standing Heat Loss: Approximately 1.37kWh per 24 hours
  • Standing Heat Loss in Watts: Approximately 57W
  • Outer Casing: Silver and 100% recyclable
  • Warranty: 25 years, subject to the manufacturer’s terms

FlowCyl Slim 120L Dimensions

  • Height: 1228mm
  • Diameter: 475mm
  • Empty Weight: 25kg
  • Approximate Full Weight: 145kg

Before ordering, measure the proposed installation area carefully. Allow enough space for the tank, connected pipework, electrical connections and future servicing.

The supporting floor must also carry the full operating weight of approximately 145kg. Therefore, the installer should check the proposed location before delivery.

What Comes with the Buffer Tank?

  • 1 x UK Cylinders FlowCyl Slim Direct 120L stainless steel buffer tank
  • 1 x built-in 3kW immersion heater

Extra valves, sensors, controls, electrical components, fittings and pipework may be required. Therefore, the installer should check the complete heating-system design before installation.

How Does a Buffer Tank Work?

A buffer tank adds water volume to the primary heating circuit. It stores heating-system water and can help maintain stable flow through a compatible heat pump or heating appliance.

For example, a heat pump may produce more heat than a small heating zone needs at a particular time. The buffer gives the system extra water volume to absorb and distribute this energy.

As a result, the heat pump may run for longer periods instead of frequently switching on and off. However, performance depends on correct sizing, pipework, controls and system commissioning.

What Does Direct Mean on This Buffer Tank?

On this product, direct means the tank includes a built-in electric immersion heater. The immersion can heat the primary system water when the system design and controls require it.

This does not mean the tank supplies domestic hot water. Unlike a direct hot-water cylinder, this product stores primary heating water only.

Why Choose a Slimline Buffer Tank?

Standard buffer tanks can be too wide for narrow cupboards, doorways or plant rooms. The FlowCyl Slim reduces the diameter to 475mm while still providing 120 litres of system volume.

Therefore, it may offer a practical solution where floor width is limited but the installation has enough vertical space. However, always check the complete installed dimensions before ordering.

Suitable Applications

  • Compatible air source heat pump systems
  • Compatible ground source heat pump systems
  • Low-temperature heating systems
  • Zoned radiator systems
  • Underfloor heating systems
  • Systems that need extra primary water volume
  • Systems requiring an additional electric heat source
  • Installations where stable system flow is important
  • Plant rooms and cupboards with limited width

Does Every Heat Pump Need a Buffer Tank?

No. Some heat pump systems can operate correctly without a separate buffer. The need for a buffer depends on the heat pump, system water volume, heating zones, emitters and control strategy.

An oversized or incorrectly connected buffer may increase heat loss and reduce efficiency. Therefore, a qualified heating engineer must calculate the required capacity and select the correct pipework arrangement.

Installation Requirements

A suitably qualified heating engineer should design and install the buffer tank. In addition, a qualified electrician must connect the immersion heater and electrical controls.

The installers must follow the latest UK Cylinders instructions and the requirements of the connected heat pump or heating appliance. They should also confirm:

  • The required buffer capacity
  • The system pressure
  • The pipework arrangement
  • The required flow rates
  • The electrical supply
  • The sensor positions
  • The control strategy
  • The supporting floor strength

Why Choose the UK Cylinders FlowCyl Slim Buffer?

The FlowCyl Slim combines stainless steel construction with a narrow 475mm diameter. Therefore, it provides a practical way to add water volume where installation width is limited.

The seven pipe connections give installers several layout options. Meanwhile, three control ports support temperature monitoring and control.

This direct model also includes a 3kW immersion heater. As a result, it can provide an additional electric heat source when used within a correctly designed heating system.

Why Buy from SNH Tradecentre?

  • Competitive prices on UK Cylinders products
  • Helpful product and technical advice
  • Genuine products from established manufacturers
  • Clear specifications to help you order correctly
  • Delivery available to eligible Mainland England addresses
  • Trade and public customers welcome
  • Independent UK plumbing and heating merchant
  • Collection available from our Birchington, Kent trade counter

UK Cylinders may update product specifications, package contents and warranty terms without notice. Check the latest technical information and confirm system suitability with a qualified heating engineer before ordering.

Additional Information

Manufacturer

UK Cylinders

Brand

MPN

FCNBV0120

SKU

FCNBV0120

Unit Quantity

1

Warranty

25 Year

Range

Slim Buffer

condition

new

Woocategory1

Heating & Cooling

Woocategory3

Woocategory2

Hot Water Cylinders

Country/Region of Manufacture

United Kingdom

Energy Efficiency Rating

C

Style

Buffer Cylinder

Width

475

Height

Depth

475

WRAS Approved

Yes

ccp_Type

Buffer

Material

Stainless Steel

Modified Item

No

Custom Bundle

No

Mount Type

Floor Standing

Litres

101 – 150

UK Cylinders are delivered Direct.

Once its on its way, UK Cylinders will send tracking details to you by email.

Local Pick Up £45.00

Delivery £55.00

England & Wales Only.

Unfortunately UK Cylinders do not deliver to Ireland, Scotland or the Isle Of Wight.