Product Description
Joule Samsung Gen 7 8kW Heat Pump Pack with 3Z Zenith Cylinder
Please select your required Zenith cylinder option from the product dropdown menu before adding this heat pump pack to your basket.
PLEASE NOTE: A qualified heat pump designer must complete a room-by-room heat-loss calculation before you order this system.
The Joule Samsung Gen 7 8kW Heat Pump Pack with 3Z Zenith Cylinder provides heating and stored hot water for suitable homes. It combines a Samsung Gen 7 R290 air source heat pump with your chosen Joule Zenith pre-plumbed cylinder.
The available Zenith cylinders offer a choice of hot water and integrated buffer capacities. Therefore, you can select an option that suits the property, available installation space and expected hot water demand.
The Samsung Gen 7 outdoor unit uses R290 refrigerant, which has a low Global Warming Potential of 3. In addition, the heat pump can provide leaving water temperatures of up to 75°C under suitable operating conditions.
This three-zone package supports two space-heating zones and one domestic hot water zone. As a result, it can suit homes that need separate control of two heating areas alongside stored mains-pressure hot water.
Choose Your Zenith Cylinder
This product is available with a choice of compatible Joule Zenith cylinders. Depending on the selected option, the package may include a Slim, Standard or Max cylinder with an integrated heating-system buffer.
Choose your required cylinder from the dropdown menu at the top of the product page. A qualified installer should confirm the correct hot water capacity, buffer volume and cylinder type before you order.
Key Features and Benefits
- Choice of Zenith Cylinders: Select a compatible cylinder to suit the property, available space and hot water demand.
- Samsung Gen 7 Heat Pump: Modern R290 monobloc technology for compatible home heating systems.
- Nominal 8kW Output: Designed for suitable properties following a professional heat-loss calculation.
- Low-GWP Refrigerant: Uses R290 refrigerant with a Global Warming Potential of 3.
- High Water Temperature: Can provide leaving water temperatures of up to 75°C under suitable conditions.
- Integrated Buffer: The selected Zenith cylinder includes an integrated buffer to support system volume and steady operation.
- Three-Zone Control: Designed for two space-heating zones and one domestic hot water zone.
- Pre-Plumbed Cylinder: Factory-fitted components can help simplify installation.
- Quiet Operation: Four-step quiet mode helps reduce outdoor-unit noise when required.
- Single-Phase Supply: Designed for a suitable single-phase electrical installation.
- Stainless Steel Construction: Durable cylinder materials support reliable long-term operation.
Samsung Gen 7 8kW Heat Pump Specification
- Manufacturer: Samsung
- Heat Pump Generation: Gen 7
- Heat Pump Type: Air source monobloc
- Nominal Output: 8kW
- Package Output Listing: 8kW to 6.37kW
- Refrigerant: R290
- Refrigerant GWP: 3
- Maximum Leaving Water Temperature: Up to 75°C under suitable conditions
- Electrical Supply: Single phase
- Quiet Mode: Four-step quiet operation
- Installation Type: Outdoor monobloc unit
Joule Zenith Cylinder Features
- Choice of compatible cylinder capacities
- Slim, Standard and Max options available within the range
- Pre-plumbed design with an integrated buffer
- Designed for compatible air source heat pump systems
- High-capacity heat pump coil
- LDX 2101 stainless steel cylinder shell
- 316L stainless steel coil and connections
- 45mm high-density polyurethane foam insulation
- 3kW Incoloy immersion heater
- Maximum mains pressure of 10 bar
- Maximum operating pressure of 6 bar
- Temperature and pressure relief setting of 7 bar / 90°C
Please note: Cylinder capacity, buffer volume, coil size, dimensions and hot water performance vary between the available options. Check the specification for your selected cylinder before ordering.
What Does 3Z Mean?
The 3Z configuration provides control for three system zones:
- Space-heating zone one
- Space-heating zone two
- Domestic hot water zone
For example, the heating zones may control upstairs and downstairs circuits independently. However, the heating engineer must design the zones and controls around the needs of the property.
Why Choose a Pre-Plumbed Zenith Cylinder?
The Joule Zenith range combines domestic hot water storage with an integrated heating-system buffer. Therefore, it can reduce the need for a separate buffer tank and help create a cleaner plant-room layout.
The pre-plumbed design also brings key components together within one organised package. As a result, it can simplify installation and reduce the time spent assembling separate parts on site.
The choice of Slim, Standard and Max cylinders allows the installer to consider hot water demand and available space. However, a qualified installer must confirm which model best suits the property.
How Does the Integrated Buffer Work?
The buffer stores primary heating water rather than drinking water. It adds water volume to the heating circuit and can help maintain the minimum flow required by the heat pump.
This extra system volume may allow the heat pump to run for longer and steadier periods. In addition, it may help reduce frequent starting and stopping.
However, every heating system has different requirements. Therefore, the system designer must confirm that the buffer within the selected cylinder suits the planned heating zones and heat emitters.
Suitable Applications
- Suitable new-build properties
- Compatible heating-system upgrades
- Homes requiring stored mains-pressure hot water
- Properties requiring two separate heating zones
- Underfloor heating systems
- Correctly sized low-temperature radiator systems
- Properties with limited cylinder installation space
- Homes with greater hot water demand
- Systems that benefit from an integrated buffer
Choosing the Correct Zenith Cylinder
The correct cylinder depends on the number of occupants, bathrooms and hot water outlets within the property. The installer should also consider the available space and the household’s normal pattern of hot water use.
Before choosing an option, consider:
- The number of people living in the property
- The number of showers, baths and hot water outlets
- How often occupants use hot water at the same time
- The available space for the cylinder
- The incoming mains water pressure and flow
- The required heating-system buffer capacity
- The planned heating zones and controls
For this reason, a qualified installer should confirm the correct cylinder option before you place your order.
Important Heat Pump Sizing Information
An 8kW product rating does not confirm that this heat pump will suit a particular property. Heat demand depends on the building size, insulation, glazing, air leakage and required indoor temperature.
Therefore, a qualified heat pump designer must complete a room-by-room heat-loss calculation. The designer should also check the radiators or underfloor heating, incoming water supply, electrical capacity and domestic hot water demand.
Choosing a heat pump without these checks may lead to poor comfort, higher running costs or frequent system cycling.
What Is Included?
- Samsung Gen 7 8kW R290 air source heat pump
- Your selected Joule Zenith pre-plumbed cylinder
- Integrated heating-system buffer
- 3kW Incoloy immersion heater
- Controls and components associated with the three-zone package
Please note: Exact package contents and product codes vary according to the cylinder option selected. Extra valves, controls, electrical parts, pipework, antifreeze protection and installation materials may also be required.
Installation Information
Qualified professionals must design, install and commission this system. They must follow the latest Samsung and Joule instructions, current Building Regulations and all requirements that apply at the installation address.
The installer should confirm the system pressure, pipe sizes, water treatment, electrical protection and control arrangement. They must also check that the installation area provides enough space for the selected cylinder, connected pipework and future servicing.
Why Buy from SNH Tradecentre?
- Competitive prices on Joule and Samsung heat pump products
- Helpful product and technical advice
- Genuine products from established manufacturers
- Clear product specifications and buying information
- Trade and public customers welcome
- Delivery available to eligible addresses
- Collection available from our Birchington, Kent trade counter
- Independent family-run plumbing and heating merchant
Manufacturers may update specifications, package contents and warranty terms without notice. Check the details of your selected option and ask a qualified heat pump professional to confirm suitability before ordering.
Additional Information
| Manufacturer | Samsung |
|---|---|
| Brand | |
| MPN | HXZ-G708-150SM, HXZ-G708-180SD, HXZ-G708-180SM, HXZ-G708-200SD, HXZ-G708-250MX |
| SKU | HXZ-G708-150SM, HXZ-G708-180SD, HXZ-G708-180SM, HXZ-G708-200SD, HXZ-G708-250MX |
| Unit Quantity | 1 |
| Warranty | Upto 25 Year Warranty |
| Shipping | Free Shipping |
| Range | 8KW Air Source |
| condition | new |
| Woocategory1 | Heating & Cooling |
| Woocategory3 | |
| Woocategory2 | Renewables |
| Country/Region of Manufacture | United Kingdom |
| Style | Unvented Cylinder |
| Option | 8KW Heat Pump with 150/30L Zenith Slim Cylinder, 8KW Heat Pump with 180/30L Zenith Slim Cylinder, 8KW Heat Pump with 180/50L Zenith STD Cylinder, 8KW Heat Pump with 200/50L Zenith STD Cylinder, 8KW Heat Pump with 250/70L Zenith STD Cylinder |
| ccp_Type | Air Source |
| Material | Stainless Steel |
| Modified Item | No |
| Custom Bundle | No |
| Mounting | Floor |
| Mount Type | Floor Standing |
| Litres | 101 – 150, 151 – 200, 201 – 250 |
| Power Source | Electric |
| Heating System | Storage Tank |
| Manufacturer Warranty | Upto 25 Year Warranty |

Local Pick Up Free
Local Delivery £9.98 (on our own transport)
England & Wales £9.98
Unfortunately we do not deliver to Ireland, Scotland and Isle Of Wight.
If you need more infomation regarding delivery, please email sales@snhuk.co.uk












