Product Description

Gledhill ES 200L Direct Unvented Cylinder – SESINPDR200

The Gledhill ES 200L Direct Unvented Cylinder (SESINPDR200) is a high-quality electric hot water cylinder designed for homes that require reliable mains-pressure hot water without using a boiler to heat the cylinder.

With an actual capacity of approximately 198 litres, twin 3kW immersion heaters and a durable duplex stainless steel cylinder, the Gledhill Stainless ES is an excellent choice for replacement and new unvented hot water installations.

Order from SNH Tradecentre for competitive pricing and 1 to 2 Day direct delivery from Gledhill to Mainland England.

Gledhill ES 200L Direct Cylinder at a Glance

• Model: SESINPDR200
• Nominal size: 200 litre
• Actual capacity: approximately 198 litres
• Type: Direct unvented hot water cylinder
• Material: Duplex stainless steel
• Heating: Twin 3kW immersion heaters
• Insulation: 40mm high-performance insulation
• Working pressure: 3 bar
• Height: approximately 1305mm
• Diameter: approximately 530mm
• Empty weight: approximately 27kg
• Full weight: approximately 225kg
• Heat loss: approximately 65W
• Warranty: 25-year cylinder warranty, subject to Gledhill terms and conditions

Why Choose the Gledhill Stainless ES 200L Direct?

The Stainless ES range combines dependable hot water performance with a straightforward design. Because this is a direct cylinder, the water is heated electrically by immersion heaters rather than through a boiler-fed heating coil.

This makes it particularly suitable for properties where electricity is the primary method of heating stored hot water.

Its unvented design supplies hot water using incoming mains pressure, helping provide strong flow rates at taps and showers when the property’s incoming water supply is suitable.

Twin 3kW Immersion Heaters

The cylinder is equipped with two 3kW immersion heaters. This provides an efficient and practical method of heating the stored water without requiring a separate boiler connection.

Using replaceable immersion heaters also helps make future servicing and maintenance straightforward for a suitably qualified installer.

Duplex Stainless Steel Construction

Gledhill manufactures the Stainless ES cylinder using duplex stainless steel, providing excellent strength and corrosion resistance for long-term hot water storage.

The cylinder is protected by approximately 40mm of insulation, helping reduce standing heat loss and retain stored hot water between heating cycles.

Gledhill ES 200L Dimensions

Before ordering, always check the available installation space and access route.

• Height: approximately 1305mm
• Diameter: approximately 530mm
• Capacity: approximately 198 litres
• Empty weight: approximately 27kg
• Full weight: approximately 225kg

Allow additional space for pipework, controls, servicing and the required unvented safety components. Installation requirements should always be confirmed by the installer before purchase.

Is a 200 Litre Direct Cylinder Right for My Home?

A 200 litre cylinder can provide substantial stored hot water, but the correct cylinder size depends on the property and how hot water is used.

Factors to consider include the number of occupants, bathrooms, showers and baths, expected simultaneous demand and the recovery time required after hot water has been used.

If you are replacing an existing cylinder, don’t select a replacement based on physical size alone. Check the required capacity, direct or indirect configuration, electrical supply, incoming mains performance and installation requirements.

What’s Included?

The Gledhill Stainless ES range is supplied with the components specified by Gledhill for the cylinder installation. The exact supplied components should be checked against the current manufacturer’s specification before installation.

Unvented hot water cylinders must be installed correctly with the appropriate safety controls and discharge arrangements.

25-Year Cylinder Warranty

For additional peace of mind, the stainless steel cylinder is covered by a 25-year manufacturer’s warranty, subject to Gledhill’s current warranty terms, correct installation, commissioning and maintenance requirements.

Professional Installation Required

An unvented hot water cylinder is not a standard DIY installation.

The unit should be installed and commissioned by a suitably qualified person in accordance with current Building Regulations, G3 requirements, the manufacturer’s instructions and all applicable electrical and plumbing regulations.

Why Buy Your Gledhill Cylinder from SNH Tradecentre?

SNH Tradecentre supplies Gledhill hot water cylinders to homeowners, plumbers, heating engineers and trade customers throughout Mainland England.

• Competitive online pricing
• Direct Gledhill delivery on qualifying cylinder orders
• Genuine Gledhill products
• Technical product information to help you select the correct cylinder
• Established plumbing and heating merchant
• Secure online ordering

Need the Gledhill ES 200L Direct Cylinder? Check the current price and availability above and order the SESINPDR200 online from SNH Tradecentre.

Frequently Asked Questions

What is the capacity of the Gledhill ES 200L Direct Cylinder?

The SESINPDR200 is sold as a 200 litre cylinder and has an actual stated capacity of approximately 198 litres.

Is the Gledhill ES 200L a direct or indirect cylinder?

This model is a direct unvented cylinder. It uses electric immersion heaters to heat the stored water rather than a heating coil connected to a boiler.

How many immersion heaters does the SESINPDR200 have?

The cylinder is supplied with twin 3kW immersion heaters.

What are the dimensions?

The cylinder is approximately 1305mm high and 530mm in diameter. Always check the latest Gledhill technical information and available installation space before ordering.

Does an unvented cylinder provide mains-pressure hot water?

Yes. An unvented cylinder uses the incoming mains water supply rather than a traditional cold-water storage tank. Actual performance will depend on the property’s incoming mains pressure, flow rate, pipework and installation.

Does the Gledhill ES cylinder need professional installation?

Yes. Unvented cylinders must be installed and commissioned by a suitably qualified installer in accordance with the manufacturer’s instructions and applicable regulations.

What is the model number for the Gledhill ES 200L Direct?

The manufacturer’s model or product code is SESINPDR200.

What warranty does the cylinder have?

The stainless steel cylinder carries a 25-year manufacturer’s warranty, subject to Gledhill’s current terms and conditions and the required installation and maintenance procedures.