Ideal Logic Air 210L Heat Pump Pre Plumbed c/w Buffer 1 Zone

The Ideal Logic Air 210L Heat Pump Pre-Plumbed Cylinder with Integrated Buffer combines approximately 199 litres of domestic hot-water storage with a 70-litre heating buffer. Designed for compatible single-zone air source heat pump systems, it includes an Ideal control box, 3kW immersion heater, large 2.5m² heat exchanger and key system controls.

£2,249.17 £2,699.00 (inc vat)

In stock

Product Description

Ideal Logic Air 210L Heat Pump Pre-Plumbed Cylinder with Buffer 1 Zone CBOX

Model: 236208

PLEASE NOTE: We can only deliver this product to Mainland England addresses. Please read the installation instructions and confirm system suitability before ordering.

The Ideal Logic Air 210L Heat Pump Pre-Plumbed Cylinder with Integrated Buffer provides a compact hot-water and heating solution for compatible air source heat pump systems. Its factory-fitted components can reduce installation time while helping installers create a neat and reliable single-zone system.

The cylinder provides an actual domestic hot-water capacity of approximately 199 litres. In addition, the unit contains a 70-litre integrated buffer tank. This buffer adds water volume to the heating circuit and can help the heat pump run for longer, steadier cycles.

A large 2.5m² internal heat exchanger supports the lower flow temperatures commonly used by heat pumps. Meanwhile, the included CBOX provides a central connection point for the system controls and sensors.

This model suits a single-zone heating system. However, an installer can upgrade the system to dual-zone operation with the correct additional equipment and system design.

Important: This listing covers the pre-plumbed cylinder, integrated buffer and listed controls. It does not include the outdoor air source heat pump unless the product offer clearly states otherwise.

Installation Guide and Product Information

Ideal Logic Air 210L Cylinder Features

  • Pre-plumbed heat pump cylinder with integrated buffer
  • Designed for compatible air source heat pump systems
  • Suitable for a single-zone heating system
  • Can support a future dual-zone upgrade when correctly designed
  • Nominal cylinder size of 210 litres
  • Actual domestic hot-water capacity of approximately 199 litres
  • Integrated 70-litre heating buffer
  • Large 2.5m² primary heat exchanger
  • Approximately 32.71-minute heat-up time under the manufacturer’s stated test conditions
  • Factory-fitted 3kW immersion heater
  • Secondary return connection
  • Energy efficiency class B
  • Includes the Ideal heat pump control box
  • Includes key valves, sensors and system components
  • Duplex stainless steel cylinder construction
  • HCFC-free insulation helps reduce stored heat loss
  • 25-year vessel warranty, subject to the manufacturer’s terms
  • Two-year warranty on other supplied components, subject to the manufacturer’s terms
  • Model number 236208

Key Features and Benefits

  • Integrated 70L Buffer: Adds heating-system water volume and can help reduce frequent heat pump cycling.
  • Pre-Plumbed Design: Factory-fitted components can save installation time and create a neater system layout.
  • Heat Pump Heat Exchanger: The large 2.5m² coil supports effective heat transfer at typical heat pump flow temperatures.
  • Single-Zone Control: Designed for a straightforward heating system with one controlled heating zone.
  • Control Box Included: The CBOX provides a central location for electrical control connections.
  • Secondary Return: Supports a correctly designed domestic hot-water circulation system.
  • Immersion Backup: The fitted 3kW immersion heater provides a secondary electric heat source.
  • Space-Saving Package: Combining the cylinder, buffer and controls can reduce the need for separate system components.

Technical Specification

  • Manufacturer: Ideal Heating
  • Range: Logic Air
  • Model: 236208
  • Cylinder Model: IDEPLUHP210DUOPPSZ
  • Product Type: Pre-plumbed heat pump cylinder with integrated buffer
  • Heating Zones: One
  • Nominal Cylinder Size: 210 litres
  • Actual DHW Capacity: Approximately 199 litres
  • Integrated Buffer Capacity: 70 litres
  • Heat Exchanger Surface Area: 2.5m²
  • Heat-Up Time: Approximately 32.71 minutes under stated test conditions
  • Immersion Heater: 3kW
  • Secondary Return: Yes
  • Energy Efficiency Class: B
  • Standing Heat Loss: Approximately 1.33kWh per 24 hours
  • Pressure-Reducing Valve Setting: 3 bar
  • Expansion Relief Valve Setting: 4.5 bar
  • Temperature and Pressure Relief Valve: 95°C / 6 bar
  • Vessel Warranty: 25 years, subject to the manufacturer’s terms
  • Component Warranty: Two years, subject to the manufacturer’s terms

Dimensions and Weight

  • Overall Height: 2095mm
  • Overall Width: 644mm
  • Overall Depth: 702mm
  • Cylinder Diameter: 550mm
  • Cylinder Body Height: 2017mm
  • Empty Weight: 68.6kg
  • Approximate Full Weight: 337.4kg

Before ordering, check the available installation space carefully. The installer must allow enough room for pipework, electrical connections and future servicing. In addition, the supporting floor must safely carry the full operating weight.

What Comes with the Cylinder?

  • 1 x Ideal Logic Air pre-plumbed unvented cylinder
  • 1 x integrated 70-litre buffer tank
  • 1 x 3kW immersion heater
  • 1 x Ideal heat pump control box
  • 1 x heat pump system filter
  • 1 x domestic hot-water three-port valve
  • 1 x pressure and temperature relief valve
  • 1 x high-temperature cut-out
  • 1 x pressure gauge
  • Automatic air vent or vents
  • Isolation valves
  • Circulation pump or pumps
  • Flow and return thermistors
  • Domestic hot-water thermistor
  • Outdoor temperature sensor
  • 1 x expansion vessel

Additional valves, electrical equipment, pipework and fittings may be required. Therefore, the installer should check the full system design and the latest Ideal instructions before starting work.

What Does the Integrated Buffer Do?

The buffer adds 70 litres of water to the primary heating circuit. This extra volume can help a compatible heat pump run for longer periods instead of starting and stopping frequently.

The buffer can also separate the heat pump circuit from the heating zone hydraulically. As a result, each circuit can maintain the flow it needs when the installer designs and balances the system correctly.

However, the correct buffer arrangement depends on the property, heat loss, heat pump output and heating emitters. A qualified designer must confirm that this cylinder suits the proposed system.

What Does CBOX Mean?

CBOX refers to the supplied Ideal control box. It provides a central point for connecting the heat pump controls, valves, pumps, thermistors and other system components.

Because the system arrives with many components already fitted, it can simplify installation and reduce the amount of separate wiring and plumbing required on site.

How Does a Heat Pump Cylinder Work?

An air source heat pump transfers heat into the cylinder through its internal primary coil. Heat pumps normally operate at lower water temperatures than traditional boilers. Therefore, this cylinder uses a large 2.5m² heat exchanger to improve heat transfer.

The cylinder stores domestic hot water for showers, baths and taps. Meanwhile, the separate integrated buffer stores primary heating water. The two water supplies do not mix.

The fitted immersion heater can provide backup heating or support a programmed hot-water cycle when the system design requires it.

What Does Single Zone Mean?

A single-zone system controls the property as one heating area. For example, one control schedule may operate the complete radiator or underfloor heating circuit.

This arrangement can suit properties that do not need separate upstairs and downstairs temperature control. However, the installer must still check the required flow rates, emitters and control strategy.

Ideal also allows this system to support a later dual-zone upgrade when installers use the correct additional components and follow the manufacturer’s design requirements.

Is a 210L Heat Pump Cylinder Suitable for My Home?

A cylinder in this size range may suit medium-sized homes with regular demand from showers, baths and taps. However, cylinder sizing should never depend on capacity alone.

A qualified installer should consider:

  • The number of people in the property
  • The number of bathrooms and hot-water outlets
  • Bath and shower usage
  • The incoming mains water pressure and flow
  • The selected heat pump output
  • The required recovery time
  • The property’s calculated heat loss
  • The heating zones and emitter design

For this reason, ask the system designer to confirm the required cylinder and buffer capacity before placing your order.

Installation Requirements

A suitably qualified heating engineer must design, install and commission this heat pump cylinder. The installer must also hold the required competence for unvented hot-water systems.

The installation must follow current regulations, the latest Ideal instructions and the heat pump design specification. In addition, a qualified electrician must complete the electrical work.

The installer should confirm the incoming mains supply, discharge pipework, expansion provision, heat pump compatibility, heating flow rates and control layout before installation.

Why Choose the Ideal Logic Air 210L Cylinder?

The Ideal Logic Air 210L package combines domestic hot-water storage, a heating buffer and key system controls in one coordinated product. Therefore, it offers a practical option for installers who want to reduce separate components and on-site assembly.

The large heat exchanger supports heat pump operation, while the integrated buffer can improve system volume and stability. In addition, the control box and factory-fitted components can make the final installation neater and easier to manage.

Why Buy from SNH Tradecentre?

  • Competitive prices on Ideal heat pump products
  • Helpful product and technical advice
  • Genuine products from established manufacturers
  • Clear specifications to help you order correctly
  • Delivery available to eligible Mainland England addresses
  • Trade and public customers welcome
  • Independent UK plumbing and heating merchant
  • Collection available from our Birchington, Kent trade counter

Ideal Heating may update specifications, package contents and warranty conditions without notice. Always check the latest manufacturer’s instructions and ask a qualified system designer to confirm suitability before ordering.

Additional Information

gtin

5022142362087

Manufacturer

Ideal

Brand

MPN

236208

SKU

236208

Unit Quantity

1

EAN

5022142362087

Warranty

25 Year Warranty

Shipping

Bulk Delivery Charge

Range

Heat Pump/Buffer

condition

new

Woocategory1

Heating & Cooling

Woocategory3

Woocategory2

Hot Water Cylinders

Country/Region of Manufacture

United Kingdom

Style

Heat Pump / Buffer Culinder

Width

702

Height

ccp_Type

Heat Pump

Material

Stainless Steel

Modified Item

No

Custom Bundle

No

Mounting

Floor

Mount Type

Floor Standing

Litres

201 – 250

Heating System

Storage Tank

Manufacturer Warranty

25 Year Warranty

We will send this item out by Pallet Service for you. Once you have placed your order we will contact you by phone to arrange a delivery day.

Local Pick Up Free

Local Delivery Free (on our own transport)

England & Wales Free

Scotland £165.00

Unfortunately we do not deliver to Ireland, Scottish Islands or above Glasgow and Isle Of Wight.

If you need more infomation regarding delivery, please call 01843 842727 Mon to Fri 8am to 5pm.