Product Description

Gledhill Stainless ES 90L Direct Unvented Cylinder – SESINPDR090

Please note: We can only deliver this cylinder to mainland England addresses.

The Gledhill Stainless ES 90L Direct Unvented Cylinder stores and heats hot water for smaller homes, flats and annexes. It has a nominal size of 90 litres and an actual capacity of around 93 litres.

This direct cylinder uses a 3kW immersion heater to heat the water. Therefore, it suits homes that need an electric hot water cylinder rather than a cylinder connected to a boiler.

Gledhill makes the cylinder from strong duplex stainless steel. This material helps protect the cylinder against rust and corrosion. In addition, 40mm insulation helps keep the water hot and cuts heat loss.

As an unvented cylinder, this model supplies hot water directly from the mains. As a result, it can provide good water pressure at showers and taps. However, the property must have a suitable mains water flow and pressure.

Gledhill ES 90L Direct Cylinder Features

• Gledhill Stainless ES direct unvented cylinder
• Model number: SESINPDR090
• Nominal size: 90 litres
• Actual capacity: around 93 litres
• Suitable for direct electric hot water systems
• Strong duplex stainless steel construction
• 40mm insulation helps reduce heat loss
• Includes one 3kW immersion heater
• Supplies mains-pressure hot water
• Maximum inlet pressure: 12 bar
• Pressure-reducing valve setting: 3 bar
• Maximum working pressure: 6 bar
• 25-year cylinder warranty, subject to Gledhill’s terms

Cylinder Size

• Height: 658mm
• Diameter: 530mm

Before you order, check the space available for the cylinder and all pipework. Also, ask your installer to check the latest Gledhill technical guide.

What Comes with the Cylinder?

• 1 x 3kW immersion heater
• Expansion vessel
• Temperature and pressure relief valve
• 3 bar inlet control set

These parts help your installer complete a safe and correct unvented hot water system. However, the installer may need extra fittings to suit the property.

Where Can You Use a 90L Direct Unvented Cylinder?

The Gledhill ES 90L direct cylinder may suit smaller homes, flats, annexes and other properties with modest hot water needs. For example, it may suit a property with fewer people and a limited number of hot water outlets.

Because this is a direct cylinder, the immersion heater heats the water. It does not use a boiler-fed coil. Therefore, it can work well in properties with electric heating or no gas supply.

However, every home uses hot water differently. The correct cylinder size will depend on the number of people, showers, baths and taps in the property. For this reason, always ask a qualified installer to check the required size before you buy.

Why Choose a Gledhill Stainless ES Cylinder?

Gledhill is a well-known UK hot water cylinder maker. Its Stainless ES range offers a good mix of value, strength and simple operation.

First, the duplex stainless steel body gives the cylinder long-term protection against corrosion. Next, the thick insulation helps keep the stored water hot. Finally, the unvented design can give you better hot water pressure than a basic gravity-fed system.

The cylinder also comes with key safety parts. As a result, your installer can source the main cylinder and its main controls in one package.

Why Buy from SNH Tradecentre?

• Competitive prices: We aim to offer great value across the Gledhill Stainless ES range.
• Helpful advice: Our team can help you compare sizes, models and cylinder types.
• Genuine Gledhill products: You can buy with confidence from an established plumbing and heating merchant.
• Direct delivery: We can arrange delivery to eligible mainland England addresses.
• Support when you need it: Contact us before ordering if you need help with the product or delivery.
• Trusted independent merchant: SNH Tradecentre supplies homeowners, landlords, plumbers and heating engineers.

Not sure if this Gledhill 90L direct unvented cylinder is right for your property? Contact SNH Tradecentre before placing your order. Our team can help you compare direct and indirect Gledhill cylinders.

Installation Requirements

A trained and qualified person must install and commission this unvented cylinder. The installer must also have the right skills to work on an unvented hot water system.

The installation must meet Section G3 of the Building Regulations in England and Wales. In addition, installers must follow the rules that apply in Scotland and Northern Ireland. They must also follow the latest Gledhill fitting guide and all local requirements.

Installation Guides and Product Information

• Download the Gledhill Stainless ES installation guide
• Download the Gledhill Stainless ES brochure
• Read our Gledhill Stainless ES cylinder buying guide
• View the Gledhill Stainless ES range

Frequently Asked Questions

Is the Gledhill ES 90L cylinder direct or indirect?

This model is a direct unvented cylinder. Its 3kW immersion heater heats the stored water. Therefore, it does not need a boiler connection to heat the water.

What is the capacity of this cylinder?

Gledhill lists this model as a 90-litre cylinder. However, its actual capacity is around 93 litres.

Can it supply mains-pressure hot water?

Yes. The cylinder takes its water supply from the mains. Therefore, it can provide good pressure at taps and showers when the property has a suitable mains water supply.

Does it include an immersion heater?

Yes. The package includes one 3kW immersion heater.

Who can install this unvented cylinder?

A qualified installer with the correct unvented hot water skills must carry out the work. They must also follow current Building Regulations and Gledhill’s latest instructions.

Where can SNH Tradecentre deliver this cylinder?

We can deliver this item to mainland England addresses only. Please contact SNH Tradecentre if you want us to check your postcode before you order.

Gledhill may change the product details from time to time. Therefore, check the latest technical guide before you buy or install this cylinder.