Ideal Pro 250L Indirect Horizontal Unvented Cylinder
The Ideal Pro Horizontal 250L Indirect Unvented Cylinder provides generous mains-pressure hot water storage for properties with limited installation height. It offers an actual capacity of 244 litres, a 20.3kW boiler-fed coil and a 22mm secondary return.
£687.50 £825.00 (inc vat)
Product Description
Ideal Pro Horizontal 250L Indirect Unvented Cylinder
Model: IDEPROIN250H
PLEASE NOTE: We can only deliver this cylinder to Mainland England addresses.
The Ideal Pro Horizontal 250L Indirect Unvented Cylinder provides a generous supply of mains-pressure hot water while fitting into areas with limited height. Its horizontal design makes it a practical choice for lofts, eaves, low plant rooms and other spaces where a standard upright cylinder may not fit.
This indirect cylinder contains a high-efficiency primary coil for connection to a suitable gas or oil boiler. It works with open-vented and sealed pumped primary heating systems. In addition, two fitted 3kW immersion heaters provide electric backup and boost options.
Ideal makes the inner vessel from high-quality duplex stainless steel. Furthermore, 50mm high-density, HCFC-free insulation helps retain the stored heat and reduce energy loss.
The unvented design connects directly to the incoming mains water supply. Therefore, it can provide strong hot water flow to compatible showers, baths and taps when the property has suitable mains pressure and flow.
Installation Guides and Product Information
- Ideal web site
- Full range of ideal unvented cylinders
- Ideal Pro Cylinder buyng guide
- Download the Ideal Pro System Ready installation guide
- View Ideal Heating cylinders
- Ideal Pro System ready cylinder
Ideal Pro Horizontal 250L Cylinder Features
- Horizontal indirect unvented hot water cylinder
- Model number IDEPROIN250H
- Nominal size of 250 litres
- Actual stored water capacity of 244 litres
- Designed for areas with limited installation height
- Suitable for use with a compatible gas or oil boiler
- Works with open-vented and sealed pumped primary systems
- High-efficiency internal primary heating coil
- 20.3kW primary coil rating
- Approximately 36-minute primary heat-up time
- Provides mains-pressure hot water
- 22mm secondary return connection
- High-quality duplex stainless steel inner vessel
- 50mm high-density, HCFC-free insulation
- Includes two 3kW immersion heaters
- ErP energy efficiency class C
- 25-year cylinder warranty, subject to Ideal’s terms
Key Features and Benefits
- Generous Hot Water Capacity: The 244-litre actual capacity can meet the higher hot water needs of many larger homes.
- Horizontal Design: The low-profile cylinder can fit into lofts, eaves and other areas where an upright model may be too tall.
- Mains-Pressure Hot Water: A suitable incoming mains supply can provide strong flow at compatible showers, baths and taps.
- High-Efficiency Coil: The 20.3kW primary coil provides an approximate 36-minute heat-up time under Ideal’s test conditions.
- Secondary Return: The 22mm connection supports a correctly designed pumped hot water circulation system.
- Two Immersion Heaters: Two fitted 3kW immersion heaters provide electric backup and boost options.
- Stainless Steel Vessel: Duplex stainless steel provides strength and good resistance to corrosion.
- Reduced Heat Loss: The high-density insulation helps keep the stored water hot.
- Installation Components Included: The package contains the main safety and control components for a suitable unvented installation.
Technical Specification
- Manufacturer: Ideal Heating
- Range: Ideal Pro Horizontal
- Model: IDEPROIN250H
- Product Type: Horizontal indirect unvented cylinder
- Nominal Size: 250 litres
- Actual Capacity: 244 litres
- Primary Heat Source: Compatible gas or oil boiler
- Primary Coil Rating: 20.3kW
- Primary Coil Surface Area: 1.27m²
- Primary Coil Pressure Loss: 0.28 bar
- Primary Heat-Up Time: Approximately 36 minutes
- Recovery Time After 70% Draw-Off: Approximately 26 minutes
- Primary Coil Draw-Off Volume: 205 litres
- Backup Heat Source: 2 x 3kW immersion heaters
- Immersion-Only Heat-Up Time: Approximately 82 minutes
- Immersion Draw-Off Volume: 120 litres
- Number of Immersion Heaters: 2
- Secondary Return: Yes, 22mm
- Energy Efficiency Class: C
- Standing Heat Loss: 86W
- Maximum Inlet Pressure: 12 bar
- Operating Pressure: 3 bar
- Pressure-Reducing Valve Setting: 3 bar
- Expansion Vessel Charge Pressure: 3 bar
- Expansion Relief Valve Setting: 4.5 bar
- Temperature and Pressure Relief Valve: 6 bar / 95°C
- Primary Coil Maximum Working Pressure: 3 bar
- Inner Vessel: Duplex stainless steel
- Insulation: 50mm high-density, HCFC-free insulation
- Warranty: 25 years on the cylinder, subject to the manufacturer’s terms
Ideal Pro Horizontal 250L Dimensions
- Overall Width: 1744mm
- Overall Height: 585mm
- Cylinder Diameter: 550mm
- Empty Weight: 35kg
- Full Weight: Approximately 279kg
Recommended Installation Space
- Minimum Cupboard Width: 2045mm
- Minimum Cupboard Depth: 1100mm
- Minimum Cupboard Height: 885mm
- Support Spacing: 970mm
- Support Width: 80mm
- Recommended Rear Clearance: 150mm
- Recommended End Clearance: 150mm
- Recommended Top Clearance: 300mm
- Recommended Front Access: 450mm
Before ordering, check the full installation area rather than the cylinder dimensions alone. Your installer must allow enough space for the expansion vessel, valves, pipework, electrical connections and future servicing.
The supporting floor or structure must carry the cylinder’s full operating weight of approximately 279kg. In addition, the installer must position the supplied supports correctly and follow Ideal’s latest instructions.
What Comes with the Cylinder?
- 1 x Ideal Pro Horizontal 250L indirect unvented cylinder
- 2 x 3kW Incoloy immersion heaters
- 1 x cold-water inlet combination valve and expansion relief valve
- 1 x temperature and pressure relief valve
- 1 x control thermostat and energy cut-out thermostat
- 1 x energy cut-out motorised valve
- 1 x expansion vessel with wall-mounting bracket
- 1 x tundish
- Horizontal cylinder support brackets
- Technical and user literature
The installation may need extra valves, fittings, controls and discharge pipework. Therefore, your installer should check the complete system design before starting work.
How Does an Indirect Cylinder Work?
An indirect cylinder contains a heating coil inside its stainless steel vessel. A compatible boiler circulates heated primary water through this coil. The coil then transfers heat into the stored domestic hot water.
Meanwhile, the unvented design takes cold water directly from the mains supply. As hot water leaves the cylinder, incoming mains water replaces it. Therefore, the system does not need a traditional cold-water storage tank in the loft.
The two immersion heaters provide electric backup and boost options. However, the boiler and primary coil normally provide the main source of heat.
What Is a Secondary Return?
The Ideal Pro Horizontal 250L cylinder includes a 22mm secondary return connection. This allows a qualified installer to create a pumped hot water circulation loop where required.
A secondary return can reduce the time it takes for hot water to reach distant taps. Therefore, it may suit larger homes with long pipe runs, several bathrooms or outlets located far from the cylinder.
However, the installer must design and insulate the circulation system correctly. An additional expansion vessel may also be required when the heated pipework holds more than 10 litres of water.
Where Can You Install a Horizontal Cylinder?
The Ideal Pro Horizontal cylinder may suit properties where limited floor-to-ceiling height prevents the use of a standard upright cylinder. Possible locations include:
- Loft and roof spaces
- Areas beneath sloping roofs
- Eaves storage areas
- Low plant rooms
- Wide airing cupboards with limited height
- Renovation and conversion projects
However, the location must provide safe access, suitable structural support and enough space for maintenance. The cylinder must also remain protected from freezing.
Is a 250L Cylinder Suitable for My Home?
Ideal’s model selection guide suggests that this size may suit some homes with two bathrooms and two separate shower rooms. It may also suit properties with up to five bedrooms or approximately seven bed spaces.
However, this provides guidance only. The correct cylinder size depends on several factors:
- The number of people living in the property
- The number of bathrooms and shower rooms
- The size and type of baths
- Whether several outlets run at the same time
- The boiler output
- The incoming mains water pressure and flow
- The required cylinder recovery time
- Whether the property needs secondary circulation
For this reason, always ask a qualified installer to calculate the required capacity before ordering.
Direct or Indirect Cylinder?
Choose an indirect cylinder when a suitable boiler will provide the main source of hot water heating. The boiler transfers heat through the cylinder’s internal primary coil, while the immersion heaters provide electric backup.
In comparison, a direct cylinder uses electric immersion heaters as its main heat source. It does not contain a primary coil for connection to a boiler.
Therefore, check the property’s heating system carefully before ordering. Direct and indirect cylinders cannot always replace each other without changes to the installation.
Mains Water Requirements
For optimum performance, Ideal recommends an incoming dynamic water pressure of approximately 3 bar and a flow rate of around 30 litres per minute.
The cylinder can operate with a lower flow rate or pressure. However, this will reduce the available hot water performance. In addition, the cylinder cannot improve a poor incoming mains supply.
Therefore, your installer should test both the pressure and flow before recommending an unvented cylinder.
Installation Requirements
A suitably qualified installer must fit and commission this unvented cylinder. The installer must hold the correct qualification or recognised competence for unvented hot water systems.
In England and Wales, the installation must meet Part G3 of the Building Regulations. Different requirements apply in Scotland and Northern Ireland. Therefore, the installer must follow the regulations that apply at the installation address.
A competent electrician must complete the immersion heater connections in line with current wiring regulations. Each immersion heater requires a suitable electrical supply and isolator.
The installer must also follow Ideal’s latest instructions for the cylinder supports, inlet controls, expansion vessel, motorised valve, safety valves and discharge pipework.
Why Choose the Ideal Pro Horizontal 250L Cylinder?
The Ideal Pro Horizontal 250L cylinder provides a practical solution for properties that need generous hot water storage but have limited installation height.
Its 244-litre actual capacity can serve larger homes with several hot water outlets. Meanwhile, the 20.3kW primary coil provides efficient boiler heating. The fitted secondary return can also support a suitable hot water circulation system.
Finally, the duplex stainless steel vessel, twin immersion heaters, insulated construction and supplied unvented controls provide a complete package for a professionally designed installation.
Why Buy from SNH Tradecentre?
- Competitive prices on Ideal Heating cylinders
- Helpful product and technical advice
- Genuine Ideal Heating products
- Delivery to eligible Mainland England addresses
- Trade and public customers welcome
- Collection available from our Birchington, Kent trade counter
- Independent UK plumbing and heating merchant
Ideal Heating may update product specifications, package contents and warranty terms without notice. Check the latest installation guide and confirm suitability with a qualified installer before ordering.
Additional Information
| gtin | 5056188304565 |
|---|---|
| Manufacturer | Ideal |
| Brand | |
| MPN | IDEPROIN250H |
| SKU | IDEPROIN250H |
| Unit Quantity | 1 |
| EAN | 5056188304565 |
| Warranty | 25 Year (Subject to Manufacturers T&C's) |
| Range | Horizontal |
| condition | new |
| Woocategory1 | Heating & Cooling |
| Woocategory3 | |
| Woocategory2 | Hot Water Cylinders |
| Country/Region of Manufacture | United Kingdom |
| Energy Efficiency Rating | C |
| Style | Unvented Cylinder |
| WRAS Approved | Yes |
| ccp_Type | Unvented Cylinder |
| Mount Type | Floor Standing |
| Litres | 201 – 250 |
| Country//Region of Manufacture | United Kingdom |

We will send this item out by Pallet Service for you. Once you have placed your order we will contact you by phone to arrange a delivery day.
Local Pick Up Free
Local Delivery Free (on our own transport)
England & Wales Free
Scotland £165.00
Unfortunately we do not deliver to Ireland, Scottish Islands or above Glasgow and Isle Of Wight.
If you need more infomation regarding delivery, please call 01843 842727 Mon to Fri 8am to 5pm.
You may also like…
-

Ideal Pro Horizontal 210L Indirect Unvented Cylinder
£633.33 £759.99 (inc vat) Add to basket Quick View -

Ideal Pro Horizontal 180L Indirect Unvented Cylinder
£604.17 £725.00 (inc vat) Add to basket Quick View -

Ideal Pro Horizontal 300L Indirect Unvented Cylinder
£726.67 £872.00 (inc vat) Add to basket Quick View -

Ideal Pro 250L Indirect Horizontal Unvented Cylinder
£687.50 £825.00 (inc vat) Add to basket Quick View







